Case types in Cympha and how each one flows
Each case type in dental case management in Cympha starts from the left sidebar and follows its own path through design, approval and delivery.
Audience: Clinicians deciding which kind of case to open, and labs who want to know what each kind of case looks like when it arrives.
You'll come away knowing: the case types in Cympha, where in the app each one is created, how each one shows in your Dashboard case table, who does the design work, which approvals you give, and where each case ends.
Where it happens: app.cympha.com: the left sidebar, the Dashboard, the New Case page and the New Clinical Case page. AI Aligner cases start on the AI Aligner page, which opens in a new browser tab.
Before you start
- A Cympha account as a doctor. The case-creation items described here are in a doctor's sidebar. A lab manager's sidebar has New Case instead, for cases he files for his own lab (see For labs below).
- For a lab case: your lab on Cympha. Cympha does not publish a list of labs. Your lab sends you its link, or tells you the lab name or the lab manager's name or email, so you can find it in the lab search. See Send a case to a dental lab.
- For a clinical case: a Cympha subscription. The free account sends every case to a lab. See Clinical case below.
Where to create each case type
All of these start in the left sidebar, or on the Dashboard (click Dashboard at the top of the left sidebar):
- New Lab Case in the sidebar, or New Lab Case at the top right of the Dashboard (the last button in that row). It opens the New Case page, where you pick the lab and its service.
- New Clinical Case in the sidebar, or New Clinical Case at the top right of the Dashboard, to the left of New Lab Case. It opens the New Clinical Case page.
- AI Aligner in the sidebar, below New Clinical Case. It opens the AI Aligner page in a new browser tab; click Start a new case there.
From Cympha Agent Manager: when the Agent watches a folder on your workstation (for example your scanner's export folder) and picks up new files, it opens the Create a case page in your browser: "Your Cympha Agent Manager picked up new files. Where should this case live?". Click Lab Case to open the New Case page, or Clinical Case to open the New Clinical Case page; the Agent then sends the files to the case. See Device pairing: install and pair Cympha Agent Manager.
The case types at a glance
| Case type | Created from | Category column on the Dashboard | Who designs | Your approvals | Ends at | |---|---|---|---|---|---| | Clinical case | New Clinical Case | Identify it by its Status: Clinical | No one: it is your own record | None | Stays on Clinical | | Lab service case | New Lab Case, then your lab and one of its services | The service name, for example the lab's crown service | The lab's designers | One: Design | Approved, then the lab's own steps to Delivered | | Orthodontics case | New Lab Case, then GuideMia Design and Orthodontics | Orthodontics | GuideMia's designers | Two: Plan, then Appliance Design | Delivered (digital files) | | Implant case | New Lab Case, then GuideMia Design and Implant | Implant | GuideMia's designers | Two: Plan, then Appliance Design | Delivered (digital files) | | AlignerBot case | New Lab Case, then GuideMia Design and AlignerBot | AlignerBot | AlignerBot, in your own lab or with you | Two: Plan, then Appliance Design | Delivered (digital files) | | AI Aligner case | AI Aligner, then Start a new case | AI Aligner, with a CAAI badge next to the status | AlignerBot, run by GuideMia | Two: Plan, then Appliance Design | Delivered (digital files) |
Find your cases in the Dashboard table
Click Dashboard in the left sidebar. The case table is below the four count cards.
- Category (third column) shows what the case is: the lab's service name for a lab service case, or Orthodontics, Implant, AlignerBot or AI Aligner.
- Status (fourth column) shows where the case is. A clinical case always reads Clinical, which is the quickest way to tell it apart from a lab case for the same patient.
- Lab shows the lab the case went to; it shows "—" when no lab has the case, as on a clinical case.
- To list one type only, use the All categories filter above the table, to the right of All statuses. It lists the categories and service names that appear in your cases, including Clinical. It narrows only the page of cases on screen, so to find one case, use the search box instead.
- Click a row to open the case page.
Clinical case
A clinical case is your own patient record. It goes to no lab, has no approval cycle and carries no price. Use it for consultations, in-practice records, photos you add over time, and any case where you have not yet decided on a lab.
- Click New Clinical Case in the left sidebar, or at the top right of the Dashboard. The New Clinical Case page opens, with a yellow notice: the case stays with you and is not sent to any lab.
- Under Patient, enter the patient's name or ID (required). Gender, date of birth and notes are optional. Cympha suggests your practice's own patient ID in place of the patient's name.
- Optional: under PMS reference, enter your practice management system and the patient's ID in it. Cympha remembers the PMS name for your next case.
- Optional: under Files, add scans, photos, CBCT, anything that belongs to this patient.
- Click Create clinical case at the bottom right. When the uploads finish, the case page opens, with the Clinical badge in its header.
The case keeps the status Clinical for its whole life. You can keep adding files and consultations to it (see Run a Consultation Start-to-Finish).
Sending work to a lab: open the clinical case (click its row on the Dashboard) and click Branch this case in the case page header. Cympha opens the New Case page with the patient details, and optionally a consultation's chief concern and files, already filled in. The new lab case then follows the lab service flow below. The clinical case stays as it is, so you can branch it again later for other work. See Branch a Clinical Case Into a Lab Case.
On the free account, New Clinical Case shows "Clinical cases need a Cympha subscription" instead of the form. Click Send a case to a lab on that notice to open the New Case page.
Lab service case
This is the everyday lab case: crowns, bridges, dentures, night guards, splints, surgical guides, or whatever else your lab makes. The lab defines its own services, prices and order forms, and you order from that list.
- Click New Lab Case in the left sidebar, or at the top right of the Dashboard. The New Case page opens.
- In the Lab section at the top, find your lab in the search box by the lab name, or the lab manager's name or email, and click it in the results. If you arrived through your lab's link, or used the lab before, the lab is already shown in a box above the search.
- Under Service, below the lab, click one of the lab's services. A service may show a price, (price set by lab), or a price guideline the lab wrote.
- The rest of the form follows that service. If the lab set up an order form for it, you fill in the lab's own fields, and the AI Extraction section can fill them from a pasted note. If not, you write your instructions under General Instructions: tooth numbers, material, shade, anything the lab should know.
- Add files, tick I'll mail physical impressions/models to the lab if physical materials are on the way, and set Date Wanted (left blank, it defaults to two weeks from today).
- Accept the pricing terms and the privacy consent, then click Submit Case at the bottom right. When the uploads finish, the case page opens.
The full walk-through is in Send a case to a dental lab.
Who designs: the lab. The case arrives at Submitted with the lab manager, may pass through Intake Review if the lab has a case intaker, then moves to Designing when a designer takes it.
Your approval: one. When the design is ready, the case moves to Awaiting Approval and you get an email. Open the case, click Review and Approve, and use Approve Design, Request changes or Escalate to lab manager. See 3D review and approval: approve or reject a design.
After approval: the case stays Approved until the lab sets In Manufacturing. Labs with a manufacturing engineer then go through Shipping to Delivered; other labs set Delivered directly.
Price: if the service has a stated price, that price applies. Otherwise the lab sends a price on the case, and you Accept or Reject it in the case's Pricing panel.
Every lab also has three pre-built services: Orthodontic Planning, AlignerBot Planning and Implant Guide Planning. A lab can switch them off. When you order one of these from your lab, it is a lab service case: the Category column shows the service name, and the case follows the lab service flow above, done by your lab.
Orthodontics and Implant cases (GuideMia Design)
Use these when you want GuideMia's own designers to do the orthodontic or implant guide design.
- Click New Lab Case. On the New Case page, type GuideMia Design in the lab search and click it in the results. The selected-lab box reads GuideMia Design Lab.
- In the AI Extraction section, a Category choice appears: AlignerBot, Orthodontics or Implant. Click Orthodontics or Implant.
- The parameters section becomes Orthodontic Parameters or Implant Parameters, a structured form with the fields GuideMia's designers need. You can paste a clinical note in the AI Extraction section and let it fill the form; review every field it fills.
- Add files, accept the privacy consent and click Submit Case.
Who designs: GuideMia's designers.
Your approvals: two, in order. First the Plan: approve it with Approve Plan. The case then goes back to Designing for the appliance (aligners or surgical guide). Then the Appliance Design: approve it with Approve Appliance. The case moves to Delivered with the digital files. There is no manufacturing step.
AlignerBot case
AlignerBot is GuideMia's automated aligner designer. It runs in GuideMia OrthoPlus on a Windows workstation paired through Cympha Agent Manager.
Create it: click New Lab Case, find GuideMia Design in the lab search, and leave AlignerBot selected under Category in the AI Extraction section. The parameters section reads Treatment Parameters. The case does not go to GuideMia Design: it goes to the lab you work in, or stays with you if you are not part of a lab ("This AlignerBot case stays with you. You are not part of a lab, so no lab receives it."). On the free account, such a case must go to a lab. The full walk-through is Submit an AlignerBot case.
Approvals: two, as for Orthodontics: Plan, then Appliance Design. After the second approval the case moves to Delivered with the digital files.
AI Aligner case
An AI Aligner case has its own short form, with no lab or service to pick. AlignerBot, run by GuideMia, produces the plan and then the aligner design.
- Click AI Aligner in the left sidebar. The AI Aligner page opens in a new browser tab, so your Cympha tab stays as it was.
- Click Start a new case. The New AI Aligner case page opens, with the sections Files, Patient & treatment plan and What AlignerBot should produce.
- Fill in the form and click Submit case. The case page opens.
In this tab, the sidebar shows New Case for further AI Aligner cases, and Cympha balance.
Approvals: two: Plan, then Appliance Design. Each request is paid from your Cympha balance when you send it: the plan when you submit, the appliance design when you approve the plan (the plan already paid is deducted), and each new run or change request. The form shows the prices and your balance, with a Top up button when the balance does not cover the plan. See Use AI Aligner — direct, no lab in the middle.
AlignerBot's plans and aligner designs are AI-produced drafts. They are not a clinical recommendation: review the plan and the design yourself before you approve them.
For labs: what arrives
A doctor's new case reaches your lab at Submitted, held by the lab manager. Lab managers and lab admins see them under Case Queue in the left sidebar; your Dashboard lists them too, with the same Category column as above.
- A lab service case carries your service (its name is in the Category column), your order form fields or the doctor's General Instructions, and the price from the service or the one you send. It has one Design approval, then your manufacturing and shipping steps.
- An AlignerBot case filed by a member of your lab belongs to your lab.
- Clinical cases never reach a lab. When a doctor branches a clinical case to you, it arrives as a new lab case, with the doctor's notes and the selected files.
- A case you file yourself: a lab manager clicks New Case in the left sidebar, or at the top right of the Dashboard. The case goes to your own lab; under Doctor / clinic you can type who it is for. It starts in Designing with you.
See Case tracking: case status glossary for every status and who holds the case at each one.
Common questions
Which type should I use for a crown? A lab service case: click New Lab Case, find your lab and pick its crown service.
Can I start a clinical case now and send it to a lab later? Yes. Open it and click Branch this case when you are ready.
Can one clinical case go to more than one lab? Yes. Each branch creates a separate lab case, so you can send a surgical guide to one lab and the prosthesis to another.
Why do Orthodontics, Implant, AlignerBot and AI Aligner cases have two approvals? You approve the plan before anyone designs the appliance, so a change to the plan does not mean redoing the appliance.
If something doesn't work
- "Clinical cases need a Cympha subscription" on New Clinical Case: you are on the free account. Send the case to a lab with New Lab Case, or subscribe from Subscription at the bottom of the left sidebar.
- "No labs found for that manager. Check the spelling, or ask your lab for the exact email.": type at least two characters of the lab name, or the manager's name or email, exactly as your lab gave it.
- "<lab> isn't accepting cases on Cympha right now. Choose another lab for this case.": that lab cannot take new cases at the moment. Pick another lab, or contact your lab.
- "This lab has no services yet.": the lab has not set up services. Ask the lab to add the one you need.
- "Please select a service." when you submit: click one of the lab's services under Service.
- "Choose a lab for this case." when you submit: on the free account every case goes to a lab. Pick one in the Lab section.
Related
- Send a case to a dental lab
- Branch a Clinical Case Into a Lab Case
- Submit an AlignerBot case
- Use AI Aligner — direct, no lab in the middle
- 3D review and approval: approve or reject a design
- Case tracking: case status glossary
- Manage your cases — dashboard, statuses, comments
