Own-lab case: file and work a case for your own lab
An own-lab case lets a lab manager record orders from clinics outside Cympha in dental case management in Cympha, from filing the case through to delivery.
Audience: Lab managers who take an order that does not arrive through Cympha: a walk-in, a phone call, an email with scans attached, or a clinic that has no Cympha account.
You'll come away with: a case in your own lab, filed under the doctor or clinic's name, already in Designing and held by you. You work it yourself or hand it to a designer, and take it to Delivered and Finished.
Where it happens: app.cympha.com, on four pages: the Dashboard, the New Case form, the case page and the Case Queue.
Before you start
- The Lab Manager role and a lab that is set up. You sign up as a lab manager and complete your lab's onboarding under My Lab in the left sidebar. The steps are in Onboard your lab on Cympha. Until the lab exists, the New Case form says "Your lab isn't set up yet, so there is no lab to file the case in." with a Set up your lab link, and Submit Case stays greyed out.
- At least one service that is turned on. Every lab starts with three pre-built services (Orthodontic Planning, AlignerBot Planning and Implant Guide Planning), plus the services you add under Services on the My Lab page. A service you turned off (its row shows Off) does not appear on the form. To turn it back on, click Turn on at the right end of its row. Adding services and order forms is covered in Digital Rx: customise your lab's intake form.
- The order itself: the scans and photos the clinic sent you, and their instructions.
The clinic does not need a Cympha account. You type its name, and nobody outside your lab takes part in the case.
Step 1 — Open the New Case form
- Click Dashboard in the left sidebar.
- Click New Case at the top right of the Dashboard, next to the refresh button. The same item is in the left sidebar, directly under Dashboard.
The New Case page opens ("Submit a new case for processing."). The sections run top to bottom: Lab, AI Extraction, Files, Physical materials, Scheduling, the service's parameters (patient and order details), and Privacy & GDPR. Cancel and Submit Case sit in the bar at the bottom right of the page.
For a lab manager, the form differs from the one doctors use in three ways:
- The Lab section shows your own lab's card ("Powered by Cympha") and has no lab search. A lab manager files cases only into his own lab.
- In place of the lab search there is a Doctor / clinic field.
- There is no Pricing & Terms section and no How payment works link in the bottom bar.
Step 2 — Name the doctor or clinic
In the Lab section, under your lab's card, type the doctor or clinic the case is for in Doctor / clinic (up to 200 characters). The field is optional (its placeholder reads "Who the case is for (optional)"), but fill it in: this name is what you and your team see in the Doctor column of the case table on the Dashboard, and under Doctor in the Assignment section of the case page.
The hint under the field reads: "No doctor account is needed. The case starts in Designing with you, and you finish and deliver it yourself."
Step 3 — Pick the service
Under Service, still in the Lab section, click the tile for the work you are doing. The tiles are your lab's services that are turned on. The selected tile is outlined.
The rest of the form follows the service:
- The service has an order form with extracted fields. The parameters section further down shows Treatment Parameters with those fields, and the Example order above them when the service has one. The AI Extraction section also becomes active (Step 4).
- The service has no order form. The parameters section shows a General Instructions text box instead, and AI Extraction reads "This service has no template — AI extraction is not available."
Step 4 — Optional: fill the order form with AI Extraction
Only for a service with an order form.
- In the AI Extraction section, paste the clinic's email or your phone notes into Case description.
- Leave the patient's name and date of birth out of that text. The note under the box says why: "Don't type the patient's name or date of birth here: this text is sent to an AI service outside Cympha."
- Click Extract with AI, at the top right of the box. It reads Extracting… while it works.
The fields of the order form below are filled from your text.
The filled fields are an AI-produced draft read from your text. Check every field against the clinic's order and correct anything wrong before you submit.
Step 5 — Add the files
- In the Files section, click the box marked Click to add files and pick the scans and photos. It accepts STL, PLY, OBJ, DICOM, JPEG, PNG, ZIP, GVW, CYP, XML and GPK, up to 1 GB each.
- On a desktop computer with a paired Cympha Agent Manager, you can click Upload via Agent under the drop zone instead. Pairing is covered in Device pairing: install and pair Cympha Agent Manager.
Files attach to the case as they upload, so you can carry on filling the form. They count toward your lab's storage like any other case.
Step 6 — Physical materials and the date
- Physical materials: if impressions or models are coming by post, tick "I'll mail physical impressions/models to the lab". The case then carries the Physical inbound label, so your team can see it in the case lists.
- Scheduling: set Date Wanted. Left blank, it defaults to two weeks from today.
Step 7 — Patient and order details
The next section is headed with the service's name followed by Parameters.
- Under Patient Information, fill in Patient Name (required). The hint under it recommends the practice's patient ID instead of the name, for example P-1023. Gender, Date of Birth and Chief Complaints are optional.
- Below that, fill in the order:
- Treatment Parameters (service with an order form): complete or correct the fields.
- General Instructions (service without an order form): type or paste the clinic's instructions, for example tooth numbers, material and shade.
Step 8 — Consent and submit
- In the Privacy & GDPR section at the bottom of the form, tick "I consent to the processing of patient data in accordance with the privacy policy and GDPR regulations." It applies to every case with patient data, including your own.
- Click Submit Case at the bottom right. The button reads Creating…. If files are still uploading, the bottom bar reads "Uploading files… please wait." and Cympha waits for them.
When everything is stored, the new case page opens.
Step 9 — Find your way around the case page
Header, from left to right: the patient's name, the case number, the category and service badges, Share, Branch this case, the status button (the Designing badge with a small arrow), Assign, Mark as Finished, Cancel Case and QC Approve.
Below the header, the page has two columns. On a narrower screen, the right column moves below the left one.
- Left: the Activity Log. Its first entries read "<your name> submitted this case" and "<your name> assigned a designer": you are the case's first designer. An own-lab case has no Case Chat.
- Right: the "Physical materials inbound" notice (only when you ticked the box), Download Lab Slip, Assignment, Patient, Case Details and Files. Assignment shows the name you typed under Doctor, you under Lab Manager, and you under Assigned To with the role designer.
What is different from a doctor's case:
- Status: Designing. The case skips Submitted and intake, and starts in Designing, held by you.
- No price. There is no Pricing section, and nothing is charged to anyone.
- No doctor. There is no case chat. In the Case Queue, the Customer chat button on the case's row is greyed out.
- No notifications to you. Cympha does not email you about a case you filed yourself, and there is no doctor to notify.
To come back to the case later: click Dashboard in the left sidebar and click the case's row, or click Case Queue in the left sidebar and click the patient's name.
Step 10 — Work it yourself or hand it to a designer
The case is already yours. To give it to someone on your team, use either:
- On the case page: click Assign in the header, right after the status button. The Assign Case dialog lists your team; click a designer. Picking someone in another role moves the case to that role's step: a case intaker moves it to Intake Review, a manufacturing engineer to In Manufacturing.
- In the Case Queue: click Case Queue in the left sidebar, then Assign at the right end of the case's row. In the Assign Designer dialog, pick a designer from the list, or Assign to me to take the case back, and click Assign Designer.
With a designer, the case stays in Designing and appears in the designer's My Assignments. The designer is emailed about the assignment. If your lab has no designers yet, the Assign Designer dialog says so and explains how they join; Assign to me still works. Assignment in general is covered in Work assignment: assign a case to a designer.
Step 11 — Take it to Delivered and Finished
An own-lab case has no approval round. Request Approval is not offered, and Awaiting Approval and Waiting on Customer are left out of the status list, because no doctor is waiting on the other end. You, or the designer holding the case, move it on:
- On the case page, click the status button in the header (the badge with the small arrow). The Change status dialog opens. Under each option it shows who will hold the case after that change.
- Click the next status. Which options appear depends on your team: Intake Review only if your lab has a case intaker; In Manufacturing, Shipping and the physical Delivered only if it has a manufacturing engineer. A lab with neither sees Submitted, Designing, Delivered ("Digital files delivered — designer still on the case for any follow-up"), Finished and Cancelled.
- "Advance to" with the new status confirms the change.
- When the work has gone back to the clinic, set Delivered. To close the case, set Finished in the same dialog, or click Mark as Finished in the header.
Send the result to the clinic the way you agreed with them, by email or with the physical work. To give them a view of the case on Cympha, click Share in the header and enter their email: the recipient can view the case, download its files and message you about it, and gets an invitation if they have no Cympha account yet.
If something doesn't work
- Submit Case is greyed out: your lab is not set up yet (follow the Set up your lab link), the page is still loading your lab, or the Privacy & GDPR box is not ticked.
- The Lab section shows no lab card and no Service tiles: your lab's onboarding is not finished. Complete it under My Lab (Onboard your lab on Cympha).
- "Please select a service.": click a service tile in the Lab section. If the section reads "This lab has no services yet.", every service is turned off: click Turn on on a service row on the My Lab page.
- "Patient name or ID is required.": fill in Patient Name under Patient Information.
- "Please accept the privacy and GDPR terms to continue.": tick the box in Privacy & GDPR.
- "This service has no template — AI extraction is not available.": the service has no order form. Type the instructions under General Instructions, or add an order form to the service (Digital Rx: customise your lab's intake form).
- "Workspace is still being prepared — try again in a moment.": the form is still getting ready for uploads ("Preparing a draft case…" under the drop zone). Wait a moment and add the files again.
- The clinic joined Cympha later: the cases you filed for them stay own-lab cases. Orders they submit themselves from then on arrive in your Case Queue as Submitted, with the doctor's approval and pricing steps.
Related
- Onboard your lab on Cympha
- Digital Rx: customise your lab's intake form
- Work assignment: assign a case to a designer
- User roles and permissions: build your lab team
- Case tracking: case status glossary
- Device pairing: install and pair Cympha Agent Manager
